Technical data

30
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
WARNING! See warnings on inside back cover.
3m.com/OccSafety/WorkerSafety
© 3M 2009. All rights reserved.Before each use of the product, please inspect for any rips, damages, tears, etc.
The 3M
™
Full Facepiece FR-M40B with 3M
™
Canister FR-15-CBRN or
3M
™
Canister CP3N puts 3M at the forefront of innovative products
for personal safety.
• Soft silicone faceseal material means a secure fit and
increased wearer comfort.
• Assembled with second skin and eyepiece outserts in
place. Just attach the FR-15-CBRN canister and you have a
NIOSH CBRN-approved system (TC-146-0271).
• Also NIOSH-approved with CP3N canister for use against
CS, CN and as a P100 filter (TC-14G-0251 Standard) in riot
conditions, including those with tear gas.
• Two integral speaking diaphragms help provide clearer
communications.
• Butyl rubber second skin provides enhanced permeation
protection, which means greater user security.
• Dual ocular lens for enhanced performance and security.
• Patented filtration technology used in our canister results in
the optimum combination of easy breathing, lighter weight,
service life and general comfort.
• Canisters have a shelf life of five years.
• Available with an optional quick doff hood.
3M
™
Full Facepiece FR-7800B
This product was designed specifically
for homeland security, military and law
enforcement personnel and features
a low-profile design to help improve
comfort. The facepiece is certified by
NIOSH for CBRN applications when used
with 3M
™
Canister FR-15-CBRN. This product positions 3M as
one of the leaders in innovative products for personal safety.
• NIOSH-approved with 3M
™
Canister CP3N for use against
CS, CN and as a P100 filter (TC-14G-0251) in riot conditions,
including those with tear gas.
• Lens meets ANSI Z87+ 2003 standard, providing high impact
protection. This facepiece can be used as primary eye protection.
• Lens has optical correction promoting no left-to-right visual
distortion.
• Butyl rubber seal to help resist permeation of warfare agents.
• Newly designed exhalation valve cover to help protect the
valve against chemical agents.
3M
™
Air-Mate
™
High Efficiency Powered
Air Purifying Respirator
Air-Mate
™
systems incorporate the
blower, filter and battery into a compact
and lightweight belt-mounted unit for
respiratory protection against airborne
particulates. These respirators are used
extensively in hospitals and in public health
applications by health care workers.
• Can be used with either lightweight head cover or hood* made
of Tychem
®
QC. The head cover/hood gives the user a wide field
of vision and directs positive airflow into the breathing zone.
• The breathing tube connects the blower unit to the head
cover/hood.
• The blower unit is a belt-mounted, lightweight package that
combines the filter, battery and motor. It pushes air through
the filter and breathing tube to the wearer’s head cover/hood.
• Replacement filters are High Efficiency (HE) type with
99.97% filtration efficiency.
• Can be worn with facial hair** and glasses. Facial hair must
not interfere with faceseal.
• No fit testing is required prior to wearing.
NIOSH’s CBRN Standard
3M now offers two products, 3M
™
Full Facepieces FR-M40B and
FR-7800B, that meet NIOSH’s Chemical, Biological, Radiological,
Nuclear (CBRN) Standard for full facepiece air purifying respirators.
They have been tested and certified by NIOSH for use against
many warfare agents including sarin and sulfur mustard as well
as many industrial chemicals. They also meet the P100 particulate
efficiency standard making them versatile, effective and reliable
for handling the kinds of emergencies that are faced by homeland
security, military and law enforcement personnel.
3M
™
Full Facepiece FR-M40B
The M-40 full facepiece has been used
for years by U.S. Armed Forces all around
the world. It has been modified by 3M for
easier breathing and is now available for
CBRN applications.
* For use up to 1000 x PEL for hoods and 25 x PEL for head covers or applicable
OSHA or other government exposure limits, whichever is lower.
** Providing the facial hair does not protrude under the faceseal or shroud.