Technical data

25
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved. Before each use of the product, please inspect for any rips, damages, tears, etc.
3M
™
Supplied Air Respirators — Product Matrix
Dual Airline, Supplied-Air, Tight-Fitting Facepieces
6000 Series Full Facepiece
(S, M, L) (AAD#: 07138; 07139;
07140)
6000 Series Half Facepiece
(S, M, L) (AAD#: 07024; 07025;
07026)
Back-Mounted
Adapter Kits
SA-2000 (High Pressure)
SA-2000LP (Low Pressure)
Front-Mounted
Adapter Kits
SA-1000 (High Pressure)
SA-1000LP (Low Pressure)
Combination Back-
Mounted Adapter Kits
SA-2100 (High Pressure)
SA-2100LP (Low Pressure)
Combination Front-
Mounted Adapter Kits
SA-1100 (High Pressure)
SA-1100LP (Low Pressure)
W-9435
3
⁄ 8 " High
Pressure Hose
(25, 50, or 100 ft.)
25 ft. (#07010)
50 ft. (#07011)
100 ft. (#07012)
W-2929
3
⁄ 8 " High
Pressure Hose
(25, 50, or 100 ft.)
W-3020
½" Low
Pressure Hose
(25, 50, or 100 ft.)
25 ft. (#07033)
50 ft. (#07034)
100 ft. (#07035)
256-02-00
(50 cfm) with CO
Filtration and
Monitor
256-02-01
(100 cfm) with
CO Monitor
W-2806
(50 cfm) without
CO Monitor
(#07006)
Note: W-2808
CO Monitor
Retrofit Kit
Available
(#37027)
Standard Kits Combination Kits
3M
™
Supplied Air Respirators are designed to deliver clean air
to the worker. The air* can be supplied from a high pressure
compressor, low-pressure pumps, or cylinders (bottled air).
Supplied air respirators offer many advantages over traditional
respiratory protection including comfort and protection.
Features
• Fit testing only required
on tight-fitting facepieces
• Can heat or cool supplied
air by up to 50°F (28°C)
when using loose-fitting
headgear
• Low maintenance
• Loose-fitting headgear
accommodates facial
hair provided it is not
interfering with the
faceseal
* It is the employer’s responsibility to ensure that the compressed air used with any supplied air system meets the requirements for at least Grade-D breathing air per the
Compressed Gas Association Commodity Specification G-7.1-1997 in the U.S. In Canada refer to CSA Standard Z180.1 table for the quality of compressed breathing air.
** Clip-on 3M
™
Welding Shield also available.
7800S**
Full Facepiece
6000 Series
Full Facepiece
FF-400 Series
Full Facepiece
6000DIN Series
Full Facepiece
7000 Series
Half Facepiece
6000 Series
Half Facepiece
FacepiecesAdapter KitsSupplied Air Hose
Portable Air
Purification Panels
3M Automotive Aftermarket Division (AAD) Product Numbers
are found in parentheses on select products.