Technical data

17
IMPORTANT: All 3M Safety Products in this catalog must be used in accordance with OSHA regulations and the User Instructions, warnings and limitations accompanying each product.
WARNING! See warnings on inside back cover.
© 3M 2009. All rights reserved. Before each use of the product, please inspect for any rips, damages, tears, etc.
Part(s) Part # Description: Notes:
L e n s C o v e r L-133 Disposable Lens Covers Disposable lens covers help protect the visor from scratches and distortions. Replace as
needed to insure proper visibility. Available in packs of 25 (L-133-25) or 100 (L-133-100).
Faceseals and Shrouds L-121 Tychem
®
QC Faceseal Faceseals insure that a proper seal is maintained with the wearer’s face. Damaged or worn
faceseals can cause leaks, which could decrease airflow, battery life, and increase the risk
of exposure.
L-123
1
Tychem
®
QC Shroud
L-124
2
Flame Retardant Faceseal - Polyester
L-125
3
Flame Retardant Shroud
L-128
4
Cordura
®
Nylon Shroud
L-120 Faceseal, Flame Retardant - Softguard
L-227 Outer Shroud, Flame Retardant, Leather
L-225-2 Outer Shroud, Flame Retardant, Durable
L-226-2 Inner Shroud
L-223-2 Outer Shroud, Standard
L-228-2 Outer Shroud, Nylon
Lens Assembly L-130 Wide-view Faceshield Assembly
L-131 Wide-view Lens
L-132 Wide-view Lens, High Temperature For use in high temp environments, where there exists potential for warping of the lens.
L-134 Latch Kit Replace latches when missing or broken. Do not use unit if latches are defective.
L-136 Cam Spring Set Replace when faceshield will not stay in up or down position, or if the faceshield is loose in
a closed position.
L-137 Wide-view Faceshield Extender Replace assembly when warped.
Head Suspension L-112 Chin Strap Accessory. Replace when worn or damaged.
L-113 Head Suspension Replace when bracket damaged or it will not tighten.
L-115 Sweat Pad Replace when dirty or when foam begins to degrade.
L-116 Head Pad Replace when dirty or damaged.
L-117 Hanger Suspension Replace when broken.
External Knobs L-140 Knob Replace when missing or broken.
L-141 Knob and Pivot Kit Replace when missing or broken.
Helmet and Head Seal L-163 Head Seal Kit Replace when dirty or damaged.
L-182 Air Deflector Replace when missing or broken.
L-183 Headgear Cover Prevents scratches and damage to the headtop.
Proper use and maintenance of powered and supplied air systems is essential to product performance. Over time, parts and
pieces will become worn or damaged, and they will require replacement. Operating equipment with damaged or worn parts can
decrease the unit’s ability to protect, decrease airflow, and could result in serious personal injury or death.
3M
™
L-Series Spare Parts and Accessories
1
For L-901 series helmets only.
2
Flame retardant faceseal for L-500 and L-700 series helmets.
3
Flame retardant shroud for L-900 series helmets only.
4
Cordura
®
Nylon fabric shroud for use with L-900 series only.