Specifications

14
Check condition of tig torch, try other tig torch
MMA Stick welding problems
• Stick electrode ‘blasts off’ when arc is struck
Welding current set to high, reduce amperage or use thicker electrode
Contaminated electrodes or material
• Electrode sticks in weld puddle
Welding current is set too low
Arc is too short, keep electrode further away from work
• Excessive splatter
Too long an arc, keep electrode closer to work
• Poor penetration
Travel speed too fast
Too much welding current, reduce welding amperage
• Porosity in weld
Electrodes are damp
Arc too long, get electrode closer to work