Specifications

Controls and Settings
Front Panel
Fig 1
1) Voltage /MMA Arcforce/TIG down slope Display
• The meter on the front panel can indicate the actual welding voltage or preset MIG voltage. The indicating
number has the precision of 0.1V .The meter indicates the preset during no welding.
• Display MMA Arcforce
• Display TIG down slope time
2) Current /Wire speed indicating
The current indicating meter on the front panel indicates the actual welding current during the welding，
indicates the wire speed during no welding.
3) Power indicating
If the indicating light is on the control circuit connects the power already.
4) TIG down slope time or post flow time
5) Wire speed - When lit LED display will show wire feed speed
6) Current - When lit LED display will show amperage
- 8 -