Specifications

Operation
SAFETY PRECAUTIONS
WARNING!
ELECTRIC SHOCK CAN KILL
Do not touch electrically live parts or electrode with skin or wet clothing.
Insulate yourself from work and ground
Always wear dry insulating gloves
WARNING!
FUMES AND GASES can be dangerous
Keep your head out of fumes & gases produced from welding.
Use ventilation or exhaust to remove fumes & gases from breathing zone and general area.
WARNING!
WELDING SPARKS can cause fire or explosion
Keep flammable material away from work area.
Do not weld on containers that have held combustibles
WARNING!
ARC RAYS can burn
Wear eye, ear and body protection Make sure work area is protected by proper shielding to avoid injury
to passers by.
Welding in MIG /MAG Mode
1 Connect the MIG Torch to machine, connect earth lead to machine & work piece.
2 Set the TIG/MMA/MIG switch to MIG
3 Select 2/4 way torch operation
4 Set Gas post flow to 1 Seconds, for special applications this can be set to max 10 seconds.
5
Select desired welding voltage
6 Select desired wire feed speed
- 17 -