Specifications

51
Int'l Customer Care: 1-940-381-1212 /
fax [phone]
Tweco.com
MIG GUNS
MIG Guns
TWECO
®
SPOOL GUN SERIES
Tweco
®
Spool Gun
160 Amp
20% Duty Cycle
Process - MIG, Aluminum. Suitable for light duty fabrication.
8-pin Amphenol Style Connector
Tweco Spool Gun
200 Amp
60% Duty Cycle
Process - MIG, Aluminum. Suitable for light to medium duty fabrication.
10-pin Amphenol Style Connector
Control Wire Jumper Cords
Use with Spool Gun - Part No. SG200-25-3545 (Stock No. 1027-1392)
Manufacturer Machine Part No. Stock No.
Miller
®
Millermatic
®
210
WSPMILL4PJC2
2031-2246
Miller Millermatic 212
WSPMILL4PJC
2031-2245
Lincoln
®
Power MIG
®
255C
WSPLIN7PJC
2031-2247
Hobart
®
Ironman
®
210, 250
WSPMILL4PJC
2031-2245
ESAB
®
MigMaster
®
203
WSPESAB7PJC
2031-2248
ESAB MigMaster 253
WSPESAB7PJC
2031-2248
ESAB MigMaster 250
WSPESAB7PJC
2031-2248
Generic See pin configuration
WSPGENJC
2031-2249
Tweco Style Rear Connector
Use only on Thermal Arc
®
141i, 181i and 211i power supplies only
Wire Size Length Part No. Stock No.
Up to .035"
(0.9 mm)
12 ft (4 m)
SG160TA-12-3035*
1027-1390
Tweco Style Rear Connector
Wire Size Length Part No. Stock No.
Up to 0.045"
(1.2 mm)
25 ft (8 m)
SG200-25-3545
1027-1392
Up to 0.045"
(1.2 mm)
25 ft (8 m)
SG200TA-25-3545*
1027-1391
*Use only on Thermal Arc 220i and 252i power supplies only
Miller is a registered trademark of Illinois Tool Works, Inc. Lincoln is a registered trademark of Lincoln Electric Co. ESAB and MigMaster are registered trademarks of
ESAB AB. The aforementioned registered trademarks are in no way affiliated with Tweco Robotics or Victor Technologies International, Inc. Tweco is a registered trademark
of Victor Technologies International, Inc.