Specifications

35
Int'l Customer Care: 1-940-381-1212 /
fax [phone]
Tweco.com
MIG GUNS
PulseMaster
™
Air-Cooled Replacement Parts
# Description Part No. Stock No.
1 Conduit Assembly
Refer to Pages 96-99
2 Nozzle
PMA24 Series
3 Contact Tip
16PS Series
4 Gas Diffuser used w/ 16PS Series Contact Tips
PMA54 -16S
1543-1106
5 Nozzle Insulator
66J-3
1660 -1836
6 Conductor Tube
PMA64EL Series
7 Handle Screws w/ T9 Star Head (12 mm, 16 mm, & 20 mm LG)
PMHSK
2060-2705
8a Handle Housing w/ Smart Control Assembly
PM84-PCB-HK
2060-2706
8b Handle Housing (Blank)
PM84-H
2060-2707
9 Large Handle Assembly w/ Retaining Ring
PM84
2060-2708
Small Handle Assembly w/ Retaining Ring
PM83
2060-2715
10 Front Cable Support
--
--
11 Cablehoz
®
Assembly
--
--
12 Rear Cable Support
235RSSR
2060-2035
13 Trig ger
PM94
2060-2712
14 Trigger & Guard Assembly
PM94X
2060-2713
15 Connector Plug
Refer to Pages 74-75
16 Control Wire Plug
MS354-DSM
2060-2140
17 Rear Case
--
--
18 Euro-Kwik Rear Connector
174EX-1
2040-2276
19 Screw (Euro Rear Connector)
4M-S
2011-2004
20 Rear Case and Strain Relief (Euro)
X6RC
2060-2006
21 Connector Nut (Euro)
174X-2
2040-2177
NS Protective Cable Wrap, 50 ft (15 m) per box
TCR50
990 0-1150
MIG Guns
PULSEMASTER
™
SERIES
SLR 100 Surge Limiting Regulator
FOR USE WITH SHIELDING GAS
Designed to reduce gas surge at the activation of the torch or
gun, which provides a more constant flow rate of shielding
gas to the welding machine.
Benefit is better weld quality and more consistent gas
consumption. (Especially when doing multiple short welds or
spot welds)
Easily connects to shielding gas supply hose as well as inlet
on welding machine.
Part No. 0781-1197
SPECIFICATIONS:
Flow:
Preset 50 SCFH (23.6 LPM
Recommended Inlet Pressure:
100 ± 20 PSIG (6.9 ± 1.38 BAR)
Maximum Inlet Pressure:
200 PSIG (13.8 BAR)
Connections:
CGA No. 030 RH for Inert Gases, Internal Thread (Inlet),
External Threat (Outlet)
NOTICE:
Note the maximum inlet pressure stamped on the regulator. Do not attach regulator
to a system that has a higher pressure than the maximum rated pressure stamped
on the regulator.