Specifications

18
U.S. Customer Care: 1-800-426-1888 /
fax [phone]
Canada Customer Care: 1-905-827-4515 / fax [phone]
MIG GUNS
Tweco
®
Style Rear Connector
Adapter kits are available to fit Tweco rear connection to most wire feeders
Wire Size Length Part No. Stock No.
Up To 1/16"
(1.6 mm)
15 ft (5 m)
515-116
1050-1113
25 ft (8 m)
525-116
1050-1115
3/32"
(2.4 mm)
10 ft (3 m)
510-332
1050-1131
15 ft (5 m)
515-332
1050-1133
Miller
®
Style Rear Connector
Wire Size Length Part No. Stock No.
Up To 1/16"
(1.6 mm)
15 ft (5 m)
M515-116
1050-1173
Lincoln
®
Style Rear Connector
Fits Lincoln LN7, 8, 9, SP200
Wire Size Length Part No. Stock No.
3/32"
(2.4 mm)
15 ft (5 m)
L515-332
1050 -1642
Some Lincoln wire feeders are assembled with their K1500-2 gun receiving
bushing that will accept Tweco Style MIG Guns direct from the factory. Control
wire Part No. MS354-DSLJ (Stock No. 2060-2137) Must be ordered separately.
Classic No. 5
500 Amp
60% Duty Cycle,
CO
2
(Carbon Dioxide)
Process – MIG, Flux Cored Gas Shielded, Flux Cored Self Shielded. Available with Dual Schedule, Locking Trigger, and Rear Connector as standard
options. Suitable for heavy duty fabrication. Standard Conductor Tube – 66J-60 (Stock No. 1660-1826); Conduit Liner – 45 Series
65J Series
25CT Series 35CT
55 Series
15H Series
16S Series
55S-SW
25I Series
STANDARD OPTIONAL
Miller is a registered trademark of Illinois Tool Works, Inc. Lincoln is a registered trademark of Lincoln Electric Co. The aforementioned registered trademarks are in no way
affiliated with Tweco Products, Inc. Tweco is registered trademark of Victor Technologies International, Inc.
MIG Guns
CLASSIC NO. SERIES