Specifications
117
Int'l Customer Care: 1-940-381-1212 /
fax 1-940-483-8178
Tweco.com
WELDSKILL
WM250J Series
HD22 Series
WS24A Series
WS34A
WS22 Series
WS32
WS23 Series
WS21 Series
WS11 Series
20062
52HD-11
WS52FN
WS52
WS14 Series
WS14 Series
WS14 Series
STANDARD OPTIONAL
Miller is a registered trademark of Illinois Tool Works, Inc. Lincoln is a registered trademark of Lincoln Electric Co. The aforementioned registered trademarks are in no way
affiliated with Tweco Products, Inc. Tweco is registered trademark of Victor Technologies International, Inc.
Tweco
®
Style Rear Connector
Adapter kits are available to fit Tweco rear connection to most wire feeders
Wire Size Length Part No. Stock No.
.045" (1.2 mm)
15 ft (5 m)
WM250-15-4045
1027-1007
15 ft (5 m)
WM250-15-4045K4
1027-1060
Miller
®
Style Rear Connector
Wire Size Length Part No. Stock No.
.045" (1.2 mm)
10 ft (3 m)
WM250M-10-4045
1027-1030
12 ft (4 m)
WM250M-12-4045
1027-1031
15 ft (5 m)
WM250M-15-4045
1027-1032
15 ft (5 m)
WM250M-15-4045K4
1027-1061
25 ft (7,6 m)
WM250M-25-4045
1027-1023
Part No. MSAK354 (Stock No. 2642-2470) Control wire assembly furnished
Lincoln
®
Style Rear Connector
Fits Lincoln LN7, 8, 9, SP200
Wire Size Length Part No. Stock No.
.045" (1.2 mm) 15 ft (5 m)
WM250L-15-4045
1027-1082
Some Lincoln wire feeders are assembled with their K1500-2 gun receiving
bushing that will accept Tweco Style MIG Guns direct from the factory. Control
wire Part No. MS354-DSLJ (Stock No. 2060-2137) Must be ordered separately.
Part No. LAK354 (Stock No. 2642-2450) Control wire assembly furnished
Euro-Kwik Style Rear Connector
Wire Size Length Part No. Stock No.
.045" (1.2 mm) 15 ft (5 m)
WM250X-15-4045
1027-1057
Suffix "K4" = Knucklehead Conductor Tube – Part No. 62SFLX480
(Stock No. 1620-1106)
WeldSkill
®
WM250
250 Amp
60% Duty Cycle,
CO
2
(Carbon Dioxide)
Process – MIG, Aluminum. Available with Rear Connector and Knucklehead
™
Flexible Conductor Tube as standard options. Suitable for light/medium
duty fabrication. Standard Conductor Tube – WM250J-60 (Stock No. 1620-1310) on all guns up to 15 ft (5 m); Conduit Liner – WS42 Series
WeldSkill
MIG GUNS