Specifications

9
Int'l Customer Care: 1-940-381-1212 /
fax [phone]
Tweco.com
MIG GUNS
Spray Master
®
450 Amp
80% Duty Cycle,
Mixed Gases
Process – MIG, Aluminum, Flux Cored Gas Shielded, Flux Cored Self Shielded. Available with Dual Schedule, Locking Trigger, Rear Connector and Knucklehead
™
Flexible Conductor Tube as standard options. Suitable for heavy duty fabrication. Standard Conductor Tube – MS64H-60 (Stock No. 1640-1319) on all guns up to
15 ft (5 m); MS64H-45 (Stock No. 1630-1318) on all gun over 15 ft (5 m); Conduit Liner – 44 Series
Miller is a registered trademark of Illinois Tool Works, Inc. Lincoln is a registered trademark of Lincoln Electric Co. The aforementioned registered trademarks are in no way
affiliated with Tweco Products, Inc. Tweco is registered trademark of Victor Technologies International, Inc.
HD24 Series
HD54-16
54A
14 Series
MS54-16H
24A Series
24CT / 24FN
Series
16S Series
EL16 Series
HD54-EL
HD54-14
34CT / 34FN
23 Series
14 Series
34A
16S Series
54A-16
MS64H Series
STANDARD OPTIONAL
MIG Guns
SPRAY MASTER
®
SERIES
Tweco
®
Style Rear Connector
Adapter kits are available to fit Tweco rear connection to most wire feeders
Wire Size Length Part No. Stock No.
Up To 1/16"
(1.6 mm)
12 ft (4 m)
MS412-116
1040-1051
15 ft (5 m)
MS415-116
1040-1052
15 ft (5 m)
MS415-116K4
1040-1530
15 ft (5 m)
MS415-116LM
1040-1053
20 ft (6 m)
MS420-116
1040-1059
25 ft (8 m)
MS425-116
1040-1058
Miller
®
Style Rear Connector
Wire Size Length Part No. Stock No.
Up To 1/16"
(1.6 mm)
10 ft (3 m)
MS410M-116
1040-1060
12 ft (4 m)
MS412M-116
1040-1061
15 ft (5 m)
MS415M-116
1040-1062
15 ft (5 m)
MS415M-116K4
1040-1531
15 ft (5 m)
MS415M-
116DSRS
1040-1536
15 ft (5 m)
MS415M-116LC
1040-1092
15 ft (5 m)
MS415M-116LM
1040-1063
20 ft (6 m)
MS420M-116
1040-1064
25 ft (8 m)
MS425M-116
1040-1068
Lincoln
®
Style Rear Connector
Fits Lincoln LN7, 8, 9, SP200
Wire Size Length Part No. Stock No.
Up To 1/16"
(1.6 mm)
15 ft (5 m)
MS415L-116
1040-1072
15 ft (5 m)
MS415L-116K4
1040-1533
15 ft (5 m)
MS415L-
116DSRS
1040-1538
15 ft (5 m)
MS415L-116LC
1040-1074
15 ft (5 m)
MS415L-116LM
1040-1073
25 ft (8 m)
MS425L-116
1040-1071
Some Lincoln wire feeders are assembled with their K1500-2 gun receiving
bushing that will accept Tweco Style MIG Guns direct from the factory. Control
wire Part No. MS354-DSLJ (Stock No. 2060-2137) Must be ordered separately.
Euro-Kwik Style Rear Connector
Wire Size Length Part No. Stock No.
Up To 1/16"
(1.6 mm)
12 ft (4 m)
MS412X-116
1040-1076
15 ft (5 m)
MS415X-116
1040-1077
Suffix "K4" = Knucklehead Conductor Tube – Part No. MS64SFLX4-80 (Stock No.
1640-1308); "DSRS" = Dual Schedule Rocker Switch; "LC" = Locking Trigger;
"LM" = Long Reach Conductor Tube – Part No. MS64H-60LM (Stock No. 1640-1317)