User Manual

ManualsBrandsR TEC AUTOMATION by Rowley ManualsRTMDCHCBPR TEC AUTOMATION by Rowley High Capacity Battery Pack

is a registered trademark of the Rowley

Company, LLC.

High Capacity Battery Pack

RTMDCHCBP

The small proﬁle allows for optimal placement in the window pocket,

fully recharges in about 6 hours and can be paired with the optional

Solar Panel Battery Charger for continuous recharging.

High Capacity Battery Pack - The rechargeable Li-ion

Battery Pack enables DC Tubular Motors to operate

wirelessly and without the constraints of traditional battery

wands with disposable batteries.

FEATURES

Up to 500

Up / Down Cycles

on Single Charge

Recharges

in 6 hours

Battery Health

Status in R-TEC

Automation

App

Optional Solar

Panel for Continuous

Recharging

Small

Profile

1 2 3 4 5 6

500

Summary of content (7 pages)

PAGE 1
High Capacity Battery Pack RTMDCHCBP High Capacity Battery Pack - The rechargeable Li-ion Battery Pack enables DC Tubular Motors to operate wirelessly and without the constraints of traditional battery wands with disposable batteries. The small profile allows for optimal placement in the window pocket, fully recharges in about 6 hours and can be paired with the optional Solar Panel Battery Charger for continuous recharging.
PAGE 2
TABLE OF CONTENTS Compliance Statement 3 Technical Data / Pack Contents Product Specifications 3 Safety 4 Installation Charging Attachment Methods Motor Connections Scenario Example Using the Solar Panel Y Cable 5-6 Dimensions 7 © 2021 Rowley® Company. All rights reserved. R-TEC Automation® is a registered trademark of the Rowley® Company, LLC.
PAGE 3
COMPLIANCE STATEMENT This device complies with the essential requirements and is tested to comply with: • UN38.3 - UN Transport Test and Criteria for Lithium Batteries. • UL 2595, CSA C22.2 No. 0.23 - General Requirements for Battery-Powered Appliances. Testing is conducted to cover all aspects of the UN Model Regulations, Manual of Test and Criteria, Part III, subsection 38.
PAGE 4
SAFETY WARNING Incorrect installation can lead to serious injury and will void manufacturer’s liability and warranty. CAUTION • • • • • • • • • • • • • Do not expose to moisture or extreme temperatures. Do not allow children to play with this device. Use or modification outside the scope of this instruction manual will void warranty. Installation and programming to be performed by a suitably qualified installer. For use within DC Tubular Motors.
PAGE 5
INSTALLATION High Capacity Battery Pack CHARGING Charging uses the 2 pin locking “SMR” style connector. IMPORTANT Rechargeable Battery Pack must be fully charged prior to first use to prolong battery lifespan. Battery Charger Connect the High Capacity Battery Pack to the Battery Charger RTMLBC or optional Solar Panel Battery Charger RTMSOLAR2. 2 pin locking “SMR” style connector Charge for 6 hours. Install as required. See below attachment methods.
PAGE 6
MOTOR CONNECTIONS Motor connections use the 2 pin, non-locking “JST” style connector DC Tubular Motor Connection Cable SCENARIO EXAMPLE USING SOLAR PANEL Y CABLE Solar Panel DC Tubular Motor Solar Panel Y Cable RECOMMENDED High Capacity Battery Pack Solar Panel OPTIONAL BEST PRACTICE After first full charge, battery condition can be maintained through the use of an optional solar panel. Battery Charger OPTIONAL © 2021 Rowley® Company. All rights reserved.
PAGE 7
DIMENSIONS 10 1/2" 7" 1 3/8" 5 1/2" Mounting the Battery Pack to the Dustboard Power Cords* Motor Battery Pack (fits inside Aluminum Roller) Dustboard *Power Cords plug into each other from the Motor to the Battery Pack. Keep cords away from rotating parts of the shade during operation. Any Questions? Contact our R-TEC Automation® in-house experts at 866.985.3423. Email us at RTECAutomation@RowleyCompany.com. © 2021 Rowley® Company. All rights reserved.