Specifications

PAGE 35
Maintenance Sevice Schedule
Maintenance Before each work
period
After each work
period
50 hrs 100 hrs 200 hrs
Check water level of batteries after charging
add distilled water if necessary
X
Check that recovery tank cover seals tightly X
Visualy check for damaged or worn tires X
Check brushes or pads for proper installation X
Check vacuum hose connections X
Check that squeegee is securely attached
and properly adjusted
X
Check that side squeegees are properly
adjusted
x
Check for attached drain hose, plug and
caps
X
Check parking brake and steering for proper
operation
X
Inspect vacuum filter for debris X
Clean out solution tank and filter, check flow X
Run vacuum motors to dry X
Clean brushes or pads and check for wear X
Clean main and side squeegee blades and
check for wear
X
Clean out recovery tank and vacuum filter X
Clean and inspect flow shutoff X
Clean outside of tanks and check for
damages
X
Store with tank covers open X
Charge batteries X
Check side squeegee for wear X
Clean off top of batteries X
Check battery cells with hydrometer X
Inspect scrub deck skirt X
Clean solution strainer X
Check battery connections are tight X
Check parking brake adjustment X
Check battery case and battery
compartment
X
Check brake for damage or wear X
Clean pivot points on squeegee and scrub
deck
X
Check all motors for carbon brush wear X
Check motor commutators X
Check steering chain tensioner X
NOTE: Traction drive, wheels and batteries should be serviced based on traction drive
hour meter. The scrub brush hour meter should be used for all other service schedule items.
Maintenance Service Schedule