Specifications

Side Broom System
1. Flip side broom switch (A) up to lower and
engage broom.
(See picture below)
2. To adjust side broom height, loosen locking
nut located behind screwhead
(B) of screw
that is in front of scrubdeck just inside the side
wall of frame on each side of the machine.
Use 1/2" wrench to loosen locking nut.
(See picture below)
3. Turn adjustment screw (B) counter-clockwise
(loosens) to lower side brooms. Turn screw
clock-wise
(tightens) to raise side brooms.
4. Retighten locking nut.
7. Picture below shows brooms to low.
5. Side broom adjustment slot (C).
(See picture below)
8. Picture below shows brooms just right.
6. Picture below shows brooms to high.
A
B
C
PAGE 30