Specifications

PAGE 15

1. The shroud must be adjusted correctly in order

to have proper water control during turns.

the front of the shroud should be slightly

higher than the rear.

(See picture to the left)

2. To adjust shrouds loosen knobs (A) and

remove shroud.

(See picture to the left)

3. Spin the RED shroud support (B) up or down to get

adjustments.

(See picture to the left)

4. Once adjusted to the proper height put the shrouds

back on top of adjustment supports and tighten

knobs back down.

(See picture to the left)

Adjusting Shrouds