Operating instructions

XR-OP-EN - 9 -

MACHINE COMPONENTS

1. STROBE LIGHT (OPTIONAL): Optional Strobe Light silently alerts others nearby of the machines

presence

2. RECOVERY TANK LID: Latch must be secured for Recovery Tank to seal properly

3. ADJUSTABLE SEAT WITH ARM RESTS: The machine is equipped with an ergonomic seat with

adjustable arm rests and positioning

4. STEERING WHEEL: Steers the main Drive Wheel

5. SEAT ADJUSTMENT: Permits the Seat to be adjusted forward and backward for operator comfort

6. HEADLIGHT: Helps you see in low light areas and to warn oncoming trafﬁ c

7. POLYURETHANE ROLLERS: Helps prevent damage to machine and objects you may drive near

8. SIDE BROOMS (OPTIONAL): Optional Side Brooms allow for debris clean up directly up to walls

9. FRONT DRIVE TIRE: Drives and steers the machine

10. TIE DOWN POINTS: Location for tie down straps during transport

11. SIDE WIPERS: Controls water on turns by directing it to the Squeegee

12. ONBOARD CHARGER (OPTIONAL): Two optional placements for the Onboard Charger Option

which allows the operator to charge machine by plugging machine directly into any standard wall

outlet

13. REAR WHEELS: Cut for complete water control

14. SQUEEGEE ROLLERS: Helps protect the Squeegee

15. TANK LATCHES: Permits access to the Recovery Tank

16. SOLUTION SIGHT GAUGE & DRAIN HOSE: Shows precise level of cleaning solution in Tank while

also used as a Solution Tank drain hose

17. RECOVERY DRAIN HOSE: Allows for controlled draining of the Recovery Tank

18. SPRAY JET HOSE (OPTIONAL): Optional Spray Jet hose allows operator to utilize the Solution

Tanks cleaning solution in areas where the machine may not reach to scrub

19. REAR BUMPER: Offers squeegee system protection from damage

20. SQUEEGEE BLADE: Squeegees water to be recovered by the vacuum hose

21. ONBOARD SUDS SYSTEM (OPTIONAL): SUDs system allows the operator to precisely add soap

directly to the Scrubdeck