Operating instructions

XR-OP-EN - 7 -

OPERATION CONTROLS

1. LCD SCREEN: Lists functions and settings of the machine

2. HIGH WATER RECOVERY LIGHT [RED]:

Indicates when the Recovery Tank is nearly full

3. MENU CONTROL: Scrolls through different options on the LCD display - there are 3 different screens

it will scroll through

4. DOWN PRESSURE TOGGLE SWITCH [BLACK]: Controls the pressure to the Scrubdeck - push up

(+) for higher down pressure, down (-) for lower pressure

5. SOLUTION FLOW CONTROL SWITCH: Push down (-) to reduce and push up (+) to increase the

solution ﬂ ow

6. SCRUBDECK SWITCH: Raises and lowers the Scrubdeck

7. REVERSE SWITCH: Pull back for machine drive reverse

8. UNITOUCH BUTTON: Activates Scrubdeck, Squeegee, and Solution Flow simultaneously

9. SQUEEGEE SWITCH: Raises and lowers the Squeegee

10. CIRCUIT BREAKER: 15 amp Positive Bus Bar

11. CIRCUIT BREAKER: 15 amp Negative Bus Bar

12. CIRCUIT BREAKER: 10 amp Side Broom Motors

13. CIRCUIT BREAKER: 2 amp Side Broom Lift Actuator

14. SPRAY JET [BLUE] (OPTIONAL): Activates Water Pump for remote Spray Wand

15. VACUUM SWITCH [WHITE] (OPTIONAL): Activates Vacuum Motor for remote Vacuum Wand

16. ECON TOGGLE SWITCH [GREEN] (OPTIONAL): Reduces power to give machine a longer run time

17. KEY SWITCH: Turns power of the machine ON and OFF

18. SIDE BROOM SWITCH [YELLOW] (OPTIONAL): Turns power of the side brooms ON and OFF as

well as lifts and lowers automatically

19. “ON-BOARD” SOAP SYSTEM [GRAY] (OPTIONAL): Dispenses soap directly to the Scrubdeck level

20. EMERGENCY STOP (OPTIONAL):

1 button push machine shut down in case of emergency

10 11 12 13