Installation Guide

R-Matte
®
Plus-3
ADDITIONAL THERMAL R-VALUES
“R” means resistance to heat flow. The higher the R-value, the
greater the insulating power. According to the ASHRAE Handbook of
Fundamentals, the reflective foil facing of R-Matte Plus-3 contributes
additional R-value to the overall assembly when installed against a
dead air space. For example, ASHRAE assigns a 2.77 R-value to a
3/4" dead-air space against a reflective foil in a typical wall assembly.
This value is in addition to the R-value of the polyiso foam - see Sytem
R-Value below.
Nominal
Thickness
Thermal
R-Value
1
System
R-Value
Pcs/Bdl
Inches °F•ft
2
•hr/Btu °F•ft
2
•hr/Btu
0.50 3.2 5.97 96
0.75 5.0 7.77 60
1.00 6.0 8.77 48
1.25 7.8 10.57 38
1.50 9.6 12.37 32
1.60 10.3 13.07 30
1.75 11.4 14.17 27
2.00 13.1 15.87 24
2.25 14.9 17.67 21
2.30 15.3 18.07 20
2.50 16.7 19.47 19
2.75 18.5 21.27 17
3.00 20.3 23.07 16
3.25 22.1 24.87 14
3.50 23.9 26.67 13
3.75 25.7 28.47 12
4.00 27.4 30.17 12
4.25 29.2 31.97 11
4.50 31.0 33.77 10
1
Thermal values are determined by using ASTM C518 test method at
75°F mean temperature on material conditioned according to PIMA
Technical Bulletin No. 101.
R-Matte Plus-3 is shipped in bundles that are approximately 48
inches high and wrapped in plastic for easy handling. Visit
www.rmax.com/resources.asp for a complete list of thicknesses and
R-Matte Plus-3
Doing one thing well
in so many ways...
Rmax is a U.S. owned
company that only
manufactures polyiso
insulation. R-Matte Plus-3
is manufactured in the U.S.
and is offered through
an extensive distribution
network. It is available in
standard four foot wide
panels, with standard panel
lengths of eight or nine feet.
Custom lengths are available
for special orders. Contact
Rmax Sales at your regional
Customer Service Center
for product availability,
pricing information, and your
nearest distribution center.
Corporate & Technical
Rmax Operating, LLC
13524 Welch Road
Dallas, Texas 75244-5291
Phone: (972) 387-4500
Fax: (972) 387-4673
Email: rmax@rmax.com
Web: www.rmax.com
Customer Service &
Plant Locations
Central Region
Dallas, Texas
(800) 527-0890 Ext. 102
Eastern Region
Greer, South Carolina
(800) 845-4455 Ext. 156
Western Region
Fernley, Nevada
(800) 762-9462 Ext. 156
2012-11