Owner's manual

R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
% : [phone]
FAX: [phone]
10/29
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
4 Lubricants
I Use of a low-grade or incompatible lubricant could damage the bearings. Use only the
lubricants recommended by the manufacturer.
Factory-installed lubricant unless otherwise specified:
Trade name and number Operating temperature
Mobilgrease XHP 222 -25…+150
4.1 Alternative lubricants
Alternative lubricants:
Trade name and number Operating temperature
Shell Alpida Grease EP2 -20…+150
Esso Unirex EP2 -25…+150
Teboil Multi-purpose HT -30…+150
Shell Alpida Grease HLS 2 S) -35…+150
Mobilith SHC 460 S) -40…+180
Shell Alpida Grease EMS S) -50…+150
S) Synthetic lubricant
If the end truck is operated for long periods in extremely cold conditions (colder than -25°C) or extremely
hot conditions (hotter than +55°C), it is recommended that a synthetic lubricant be used.