User Manual

R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
% : (937) 328 -5100
FAX: [phone]
2/11
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
EN PS01645 Rev: 07.10.02
I Read the instructions supplied with the hoist before installation and commissioning.
F Keep the instructions in a safe place for future reference.
Table of content
1 Instructions..................................................... 3
1.1 Symbols and abbreviations ......................... 3
2 Safety instructions......................................... 3
2.1 Safety instructions for preparing to install
the drive................................................................. 3
2.2 Safety instructions for installing and
operating the drive ................................................ 3
2.3 Safety instructions for servicing the drive ... 4
3 GES Drive........................................................ 4
3.1 General ........................................................ 5
3.2 Mounting position of the drive ..................... 5
3.3 Assembling the drive ................................... 5
3.4 Start-up procedure....................................... 6
3.5 Inspection and service procedure for Drive 6
3.6 Removing the drive ..................................... 7
4 MF06 motor with Compact or DC brake...... 7
4.1 Adjustment of Compact-brake air gap ........ 8
4.2 Removing the Compact-brake .................... 8
4.3 Removing and inspection of DC brake ....... 8
4.4 Removing the motor................................... 9
5 MF07 and MF10 motor................................... 9
5.1 Removing and inspection of DC brake ..... 10
5.2 Removing the motor.................................. 10
6 Lubricants..................................................... 10
6.1 Alternative lubricants ................................. 11
7 Recommended tightening torques............ 11
8 Inspection and servicing intervals............. 11