User Manual

LM TMU I&M MANUAL/EN/06.15.2009
10/38
This document and the information contained herein, is the exclusive property of R&M Materials Handling, Inc., and represents a non-public, confidential and proprietary trade secret
that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials Handling, Inc.
Copyright © (2009) R&M Materials Handling, Inc. All rights reserved.
1.3 TROLLEY FLANGE SETTINGS TABLE
Table 1. Trolley Flange Settings
C1 Trolley C2 Trolley C3 Trolley C5 Trolley
Flange
Width
In [mm]
2.52 [64] 4 0 2 0 0 0
2.60 [66] 6 2 0 2 0 1
2.83 [72] 14 4 1 8 2 0
2.87 [73] 16 4 2 10 2 1
2.91 [74] 225 18 6 0 10 2 1
3.19 [81] 22 6 2 17 4 1
3.23 [82] 24 8 0 17 4 1 3 0 1 6 1 0
3.50[89] 30 8 3 25 6 1 8 2 0 12 2 0
3.54 [90] 30 10 0 25 6 1 11 2 1 14,5 2 1
3.58 [91] 32 10 1 28 6 2 11 2 1 14,5 2 1
3.86 [98] 36 12 0 260 34 8 1 19 4 1 309 20,5 3 1
3.94 [100] 40 12 2 36 8 2 198 4 1 24 4 0
4.17 [106] 0 0 0 42 10 1 27 6 1 30 5 0
4.25 [108] 2 0 1 44 10 2 27 6 1 32,5 5 1
4.33 [110] 3 1 0 46 10 3 30 6 2 35 5 2
4.45 [113] 8 2 1 48 12 0 305 32 8 0 6 1 0
4.65 [118] 9 3 0 54 12 3 38 8 2 12 2 0
4.69 [119] 11 3 1 54 12 3 38 8 2 12 2 0
4.72 [120] 12 4 0 56 14 0 40 10 0 14,5 2 1
4.92 [125] 16 4 2 60 14 2 46 10 2 18 3 0
4.96 [126] 18 4 3 62 14 3 46 10 2 20,5 3 1
5.16 [131] 20 6 1 2 0 1 51 12 1 24 4 0
5.24 [133] 270 22 6 2 6 0 3 54 12 2 339 26,5 4 1
5.31 [135] 24 8 0 8 2 0 54 12 2 30 5 0
5.39 [137] 26 8 1 8 2 0 56 14 0 30 5 0
5.51 [140] 30 10 0 12 2 2 3 0 1 32,5 5 1
5.63 [143] 32 10 1 14 2 3 6 0 2 36 6 0
5.75 [146] 36 12 0 17 4 1 8 2 0 42 7 0
5.79 [147] 38 12 1 20 4 2 8 2 0 42 7 0
5.87 [149] 40 12 2 20 4 2 11 2 1 42 7 0
5.91 [150] 46 12 3 22 4 3 11 2 1 44,5 7 1
6.10 [155] 26 6 1 16 4 0 6 1 0
6.22 [158] 30 6 3 19 4 1 8,5 1 1
6.30 [160] 32 8 0 22 4 2 12 2 0
6.53 [166] 38 8 3 355 227 6 1 17 2 2
6.62 [168] 325 40 10 0 30 6 2 20,5 3 1
6.69 [170] 42 10 1 32 8 0 20,5 3 1
7.00 [178] 50 12 1 40 10 0 381 30 5 0
7.08 [180] 52 12 2 43 10 1 32,5 5 1
7.28 [185] 56 14 0 46 10 2 36 6 0
7.32 [186] 58 14 1 48 12 0 38,5 6 1
7.40 [188] 60 14 2 51 12 1 38,5 6 1
7.48 [190] 62 14 3 51 12 1 42 7 0
7.79 [198] 6 0 3 3 0 1 49,5 7 3
7.87 [200] 8 2 0 3 0 1 50,5 8 1
8.11 [206] 14 2 3 11 2 1 6 1 0
8.26 [210] 17 4 1 14 2 2 12 2 0
8.46 [215] 22 4 3 19 4 1 18 3 0
8.58 [218] 390 26 6 1 415 22 4 2 429 20,5 3 1
8.66 [220] 28 6 2 24 6 0 23 3 2
8.90 [226] 34 8 1 30 6 2 30 5 0
9.44 [240] 48 12 0 43 10 1 44,5 7 1
9.76 [248] 56 14 0 51 12 1 52 7 4
10.24 [260] 4 0 2 6 0 2 5 0 2