Owner's manual

LM10 STEPLESS I&M MANUAL/EN/11.30.2010
49/99
This document and the information contained herein, is the exclusive property of R&M Materials Handling, Inc., and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials Handling, Inc.
Copyright © (2010) R&M Materials Handling, Inc. All rights reserved.
7.5.12 Drawings
Table 15. Description of terminals X1
BOTTOM LEVEL UPPER LEVEL
No Name Description, signal level No Name Description, signal level
PE
91 L11 Power supply to trolley, phase 1 L1 L1 Power supply, phase 1
92 L12 Power supply to trolley, phase 2 L2 L2 Power supply, phase 2
93 L13 Power supply to trolley, phase 3 L3 L3 Power supply, phase 3
B+ R+ Braking resistor U/T1 U/T1 Motor output, phase 1
R- R- Braking resistor V/T2 V/T2 Motor output, phase 2
W/T3 W/T3 Motor output, phase 3
PE
DOLD, OVERSPEED MONITOR
1 OLE Control voltage fuse
1 OLE
External control voltage,
48/115/230Vac
6 MT S1 Motor trolley, direction 1
1 OLE
External control voltage,
48/115/230Vac
7 MT S2 Motor trolley, direction 2
2 ROS
Relay output of speed detection
device
8 MT SP2 Motor trolley, SP2/AP
3 DID4 (S12) Stop limit signal, direction 1 9 ONE Neutral of external control voltage OLE
4 DID5 (S22) Stop limit signal, direction 2 9 ONE Neutral of external control voltage OLE
5 ES External Stop 10
PE
Table 16. Description of terminals X2
No Name Description, signal level
2 ROS Relay output of speed detection device
2 ROS Relay output of speed detection device
3 DID4 (S12) Stop limit signal, direction 1
4 DID5 (S22) Stop limit signal, direction 2