Owner`s manual

9
REV 4 0811041514
No. L-A2-02908
LOG PLACEMENT
LOG PLACEMENT
(for Charred Series see supplement instructions on pages 10 & 11)
Proper log placement is important to ensure proper performance
of your Real-Fyre gas log set. Be sure to follow the log placement
instructions carefully. Optional log placement patterns, an exclusive
feature of Real-Fyre gas logs, are explained below.
REAL-FYRE GAS LOG SETS 18"-36"
PLACEMENT OF BOTTOM LOGS
Place the front and rear bottom logs (Logs #1 & #2) on the grate, with
the longest log in front (Figure 2).The log locators insure that adequate
space between the logs are maintained for a cleaner burn.
3
4
PLACEMENT OF MIDDLE AND TOP LOGS
Option 1: Place the two middle logs (Logs #3 & #4)
on the bottom logs (Logs #1 & #2). The knotholes of
the middle logs are placed over the space between
the front and rear bottom logs (Figure 3). Top logs
(Logs #5 & #6) are placed with one end resting near
the knothole of the middle logs and the other resting
on top of the front bottom log (Figure 4).
Figure 5
Option 2.
OPTIONAL PATTERNS LOG PLACEMENT SUMMARY
The three illustrations below show the three log placement patterns available for Real-Fyre C.S.A. Certifi ed
glowing embers gas log sets. The mirror image of each of the illustrations is also approved.
Option 2: Place the middle logs as instructed under
Option 1 (Figure 3). Top log (Log #6) is then set with
one end near a middle log knothole and the other end
resting on the bottom front log. The other top log (Log
#5) is set with one end near the knothole of the other
middle log and the other end resting on the bottom
rear log (Figure 5).
Figure 6
Option 3.
Option 3: Place the middle logs (Logs #3 & #4) so
they are parallel, resting on the bottom logs with the
knotholes over the space between the bottom logs.
Place the top logs (Logs #5 & #6) parallel to each
other across middle logs (Figure 6).
Option 3Option 1
Option 2
Figure 3
1
2
5
6
Figure 4
Option 1.
Figure 2