Owner`s manual

16
# Description Part Number Qty
1.
Knotted log OCBWL-17 1
2.
Hooked log OCBWL-18 1
3.
Crooked log OCBWL-16 1
4.
Curved log OCBWL-15 1
5.
Stripped log OCBWL-12 1
6.
Long charred log OCBWL-20 1
7.
Short charred log OCBWL-9 1
8.
Volcanic stones (box) VS-25 1
Fig. 16-1
1
3
7
4
5
2
6
Although log placement may vary, suggested log
placement for the Beachwood log set is provided below.
These log placements will allow for superior fl ame
pattern and appearance. Please read these instructions
completely and carefully before beginning.
LAVA AND STONE PLACEMENT
WARNING: Use only parts specifi cally approved
for use with this Real-Fyre
®
gas log
set. Failure to do so may result in
property damage or personal injury.
Check with your local Real-Fyre
®
dealer if you need more information.
1. FIRST, pour the 10 lb bag of lava granules into
the burner pan, evenly covering the burner pan
assembly with the exception of the screen. THEN,
pour the 6 lb bag of lava coals into the burner pan,
evenly covering the burner pan assembly with the
exception of the screen. (Granules are smaller in
size, coals are larger.)
2. Pour the volcanic stones on top to fi ll the whole
burner pan.
With the ignitor screen clear of lava media and
volcanic stones distributed on top of the lava, nearly
any log placement is possible. It is also possible to
use only the Volcanic Stones and no logs at all.
Some general guidelines include always placing the
fl at side of each log downward or inward and making
sure the logs are positioned so they are stable and
will not shift or roll. Logs must remain in the burner
pan when hot.
Fig. 16-3
1
2
Fig. 16-2
8
Screen with lava on burner pan
DO NOT PLACE
LAVA MEDIA
ON THE SCREEN
OPTIONAL BEACHWOOD LOGS AND/OR VOLCANIC STONE
OCBW-34
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
22
2
22
2
2
2
2
2
2
2
2
2
2
1
2