Owner`s manual

INSTALLATION OF THE OUTDOOR CAMPFYRE

™

RING

First, remove the ring from its packaging and make sure that

it has not been damaged during shipping. Then follow the

two simple steps below.

CAUTION: Ring is heavy.

STEP 1:

You must ﬁ x the ring permanently in place. To do this,

apply a bead of high-temperature silicone (included) around

the top of the Outdoor Campfyre

™

base, just outside of the

raised locator tags (Fig. 15-2).

Apply a bead of silicone as shown

on the area where ring will sit.

Fig. 15-2

Fig. 15-4

Fire Ring

Fig. 15-1

Fig. 15-3

Carefully set ring into place

Ring locator tabs inside ring.

Ring locator tab

RING LOCATOR TABS

Silicone bead

Appy silicone within this area

STEP 2:

Carefully lift the ﬁ re ring over the Outdoor Campfyre

™

and

place it on top of the base with the locator tabs inside the

ring (Fig. 15-4).

Fire ring

Ring locator tabs

Apply silicone within this area

outside ring locator tabs

Silicone bead