Owner`s manual

23
CAUTION: Installation and repair must be done by an NFI Certifi ed or other qualifi ed service person.
Installer: Carefully read these instructions before installing this gas log set. Be sure you understand all
safety precautions and warnings contained in this manual.
CLEANING and SERVICING
A. Always shut off the gas to the unvented gas log set while performing service work.
B. Allow the unvented gas log set to cool before servicing.
C. The gas log set should be inspected regularly to prevent burner shutdown, sooting, odors, etc. This
unit must be cleaned at least annually by a professional service person. The ODS pilot system must
be checked for clean-burning operation and proper appearance by a qualifi ed professional service
technician with the correct tools to service this unit. More frequent cleaning may be required.
Excessive lint can build up on this unit from carpeting, bedding material, pet hairs, or other particles in the
air. It is critical that all control components, burners, and circulating air passageways be kept clean and
free of all obstructions. The ODS pilot is especially sensitive to a dirty environment and will not function
properly if dirty.
Make certain all air openings are clean and free of obstructions, including:
1. The two (2) air intake openings on ODS pilot assembly.
2. The ODS pilot opening.
3. The air shutters on the front/bottom burner for a natural gas log set and the air shutters on both the
front/bottom and rear/top burners for a propane gas log set.
4. All of the portholes on the carryover tube.
5. All of the portholes on both the front/bottom burner and the rear/top burner.
6. Check to make sure that the embers are spread evenly across the bottom/front burner, not clumped
together (see GLOWING EMBERS PLACEMENT).
D. Any safety screen or guard removed for servicing must be replaced prior to operating this gas log set.
CLEANING AND SERVICING
Fig. 23-1
Fig. 23-2
ODS pilot
gas line
Air shutter
openings
ODS pilot
system
Burner
port
holes
ODS/Pilot
ODS/Pilot
opening
Air intake
openings
ODS pilot
opening
Air intake
openings
ODS pilot