Owner`s manual

19
Fig. 19-1
Fig. 19-2
Note: Regular cleaning and servicing will be necessary to ensure proper ODS pilot operation and proper
burn characteristics.
A. Always shut off the gas to the vent-free gas log set while performing service work.
B. Allow the vent-free gas log set to cool before servicing.
C. Installation and repair must be done by an NFI Certifi ed or other qualifi ed professional installer. The
gas log set should be inspected regularly to prevent burner shutdown, sooting, odors, etc. This
unit must be cleaned at least annually by a professional service person to check for clean burning
operation and proper ODS appearance, with the correct tools to service this unit. More frequent
cleaning may be required. Excessive lint can build up on this unit from carpeting, bedding material,
pet hairs, or other particles in the air. It is critical that all control components, burners, and circulating air
passageways be kept clean and free of all obstructions. The ODS pilot is especially sensitive to a dirty
environment, and will not function properly if dirty.
Make certain all air openings are clean and free of obstructions, including:
1. The two (2) air intake openings on the ODS pilot assembly.
2. The ODS pilot opening.
3. The air shutter - on the burner.
WARNING: Failure to keep the primary air openings of the burner clean may result in sooting and property
damage.
4. All of the ports on the burner.
D. Any safety screen or guard removed for servicing must be replaced prior to operating this gas
log set.
CLEANING AND SERVICING
Air shutter
ODS pilot location
Burner ports
ODS/PILOT
OPENING
AIR INTAKE
OPENINGS
ODS/PILOT
ODS pilot
opening
Air intake
openings
ODS pilot