Owner`s manual

SPECIFICATIONS

Real-Fyre gas burner systems must be installed only in a wood burning ﬁ replace with the minimum ﬁ rebox

dimensions and venting requirements met (see table on this page). This appliance is designed to burn with

yellow ﬂ ames; adequate ventilation is absolutely necessary.

Minimum permanent free opening area of chimney damper for venting (sq. in.)

For factory-built ﬁ replaces

Chimney height 18/20" 24/30"

15' 20 24

20' 17 21

30' 14 16

For masonry-built ﬁ replaces

15' 30 35

20' 27 32

30' 25 29

Note: The minimum chimney height from hearth to top of chimney is 15'.

Table 2 - Minimum Chimney Damper Vent Opening Requirements

Burner

Model

Minimum Fireplace Size BTU Rating

Width

Depth Height Nat. Gas

Front Rear

G52-18/20 27" 19" 16" 15" 46k

G52-24/30 (24" log set) 33" 25" 16" 15" 55k

G52-24/30 (30" log set) 39" 32" 16" 15" 55k

Table 1 - Minimum Fireplace Dimensions and BTU ratings

Note: Rear width is at corresponding depth.