Owner`s manual

Note: Servicing may be necessary to ensure proper pilot operation and proper burn characteristics.

Always shut off the gas to the appliance while performing service work.

Allow the appliance to cool before servicing.

Installation, service, and repair must be done by an NFI Certiﬁ ed or other qualiﬁ ed professional service

technician. The appliance should be examined before use, and must be inspected at least annually to

prevent burner shutdown, sooting, odors, etc. It must be checked for clean burning operation and proper

pilot appearance, with the correct tools to service this unit. More frequent servicing may be required. It is

imperative that all control components and compartments, burner(s), air shutters, and circulating air passageways

of the appliance be kept clean and free of all obstructions (as applicable).

In addition, a periodic examination and cleaning of the solid-fuel-burning ﬁ replace venting system should be

conducted by a qualiﬁ ed professional service technician.

Any safety screen or guard removed for servicing must be replaced prior to operating this appliance.

Verify proper operation after servicing.

If, after a period of use, the ﬂ ames start to exhibit unusual shapes and behavior, or the burners fail to ignite

smoothly, the burner may require cleaning or servicing. If this happens, it is recommended to contact the

nearest dealer to get the appliance serviced.

Do not remove the rating plates or the warning tags. These are

an integral safety and identiﬁ cation component of this appliance.

We recommend following these instructions at the beginning

of each ﬁ replace season and as needed throughout the year,

depending on your usage pattern and the environmental

conditions in your home. More frequent cleaning and

maintenance may be necessary when burning propane gas

than with natural gas.

CLEANING AND SERVICING

Fig. 37-1

24" 2VA model shown