Owner`s manual

35
REMOTE OPERATING INSTRUCTIONS - 2VA SERIES
ORIENTATION
Prior to remote transmitter use, light the appliance per the
REMOTE LIGHTING section. The remote transmitter will only
operate the unit when it is in the remote mode. Familiarize
yourself with the transmitter keys, as illustrated in Fig. 35-1.
Identify the four transmitter keys (used with this system):
• ON/OFF KEYS: These keys turn the system ON or OFF.
• HI/LO KEYS: These keys, when the system is on, are
used to set the desired fl ame height.
Note: The Continuous Pilot function is not available for use
on this burner system.
FLAME HEIGHT
Seven fl ame height levels are available. Press the HI/LO keys
to enter the Flame Height mode. Pressing the HI/LO key once
will increase/decrease the fl ame height by 1 of 7 increments.
See Fig. 35-1.
ON
OFF
HI
LO
ON/OFF
Continuous Pilot
Fig. 35-1 Remote transmitter detail
HI/LO
fl ame
adjustment
key
ON
key
OFF
key
Signal
light
N/A