Owner`s manual

To adjust the ﬂ ame pattern, take a long blade screwdriver or similar tool and stir the granules until the desired pattern

is achieved. DO NOT REMOVE GRANULES FROM THE BURNER PAN.

FLAME PATTERN ADJUSTMENT (ALL MODELS)

Insert blade into sand and stir

granules in various places until

desired flame pattern is achieved.

Long bladed screwdriver

(or similar)

MAINTENANCE: Periodically remove the logs and examine the burner assembly. If dirty, clean with a stiff

brush. Also examine the area around the pilot. Any dirt or lint in this area should be removed. This will

ensure long life and trouble-free operation. An annual inspection and cleaning of the vent system (chimney

and damper) by a qualiﬁ ed agency is recommended. For safe operation and proper performance, use only

Peterson Real-Fyre parts and accessories.