Owner`s manual

INSTALLING YOUR REAL-FYRE GAS LOG SET (Continued)

WESTERN CAMPFYRE STYLE LOGS LAYOUT SUMMARY

If you have purchased this style of log set, follow the instructions below.

NOTE: LOG PLACEMENT is very important for the proper operation and performance of the

Real-Fyre gas log set. Please follow these instructions carefully. Refer to the photo

(Figure 19) for log numbering and the overall look of the completed layout.

Step 1. Install the coals fyrebed provided with your G46 as shown on page 14.

Step 2. Place the bottom rear log (#1 in the photo) on the back of the grate so that the bark faces to the front.

The two ﬂ at indentations and “V” notch will be face up.

Step 3. Place the left and right logs (#2 & #3) so they rest on the ﬂ at indentations on the rear Log #1 and on

the ends of the grate front bar leg. You may need to adjust slightly to secure in position.

Step 4. Place top log #4 resting with the pointed end ﬁ tting in the “V” notch on the rear log #1. The notch on

the other end of Log #4 rests against the second right side outer grate ﬁ nger (check photo).

Step 5. Place top log #5 with the “Y” end resting securely on the second left side outer grate ﬁ nger, the op-

posite end resting on Log #4 (check photo).

Step 6. Place top log #6 resting in the cutout on right log #3 with its opposite resting on Log #4 (check photo).

Step 7. Place top log #7 (the shortest log) on the ﬁ replace bottom, resting against the front middle grate ﬁ nger

(check photo)

Step 8. Place top log #8 so it rests on Log #4 and on Log #3 (check photo).

Step 9. Place top log #9 (the round log) so it rests against the right front leg and between the two right side

outer grate ﬁ ngers (check photo).

WESTERN CAMPFYRE 24

1. MWCFL-18BR REAR LOG

2. MWCFL-18L LEFT LOG

3. MWCFL-18R RIGHT LOG

4. MWCFL-13T TOP LOG

5. MWCFL-13TY TOP LOG

6. MWCFL-10TY TOP LOG

7. MWCFL-8T1 TOP LOG

8. MWCFL-11T TOP LOG

9. MWCFL-5T TOP LOG

SCREEN 200394

ITEMS

Figure 19