Owner`s manual

13
INSTALLING YOUR REAL-FYRE GAS LOG SET (Continued)
The illustrations below (Figures 12A-C and 12D-F for Split Oak) show the three basic log placement
patterns available for G46 Real-Fyre C.S.A. Certifi ed gas log sets. The mirror image of each of the
illustrations is also approved. These log placement patterns are the acceptable patterns for all other sets.
REAL-FYRE GAS LOG SETS OPTIONAL
BONUS LOG PLACEMENT
Your optional bonus log (included with Golden Oak Designer
Plus and Split Oak Designer Plus Log Sets) should be
placed directly above the front or rear bottom logs (Logs
#1 & #2), so it does not extend into the space between the
front and rear logs, as shown in Figure 11.
Figure 12E
Figure 12F
Log #7
Figure 11
Figure 12A
Figure 12B
Figure 12C
Figure 12D
OPTIONAL LOG PLACEMENT PATTERNS SUMMARY