Owner`s manual

30
AVAILABLE ACCESSORIES FOR THE GAS BURNER SYSTEM
The following accessories are available for burner systems as indicated, and can be purchased separately
from your local Peterson Real-Fyre
®
dealer. Before purchasing, make sure the accessory you desire is
compatible with your specifi c model (for example, VR-2A is used with the series 15 systems). To install
and operate any accessory, simply follow the instructions supplied with your accessory kit.
PHOTOS NOT TO SCALE
FOR SERIES 15: WS-3 WALL SWITCH
THE WS-3 SWITCH OPERATES FLAME-HEIGHT CONTROL KNOB ON SERIES 15 VALVES
FOR SERIES 15: REMOTE TRANSMITTERS AND RECEIVERS
FOR VARIABLE FLAME-HEIGHT CONTROL
(FOR USE WITH SERIES 15 VALVES) AND FOR NATURAL OR PROPANE GAS
VR-1A
Transmitter handset,
receiver, handset
holder, and wiring
RVF-1
Transmitter handset,
receiver, and wiring
Switch to
valve wiring
Wall switch
cover
Cover
screws
Battery
holder
VR-2A
Transmitter handset,
receiver, handset holder,
wall switch, and wiring
FOR SERIES 16: WS-4 WALL SWITCH
Switch to
valve wiring
Wall switch
cover
Cover
screws
Battery
holder
Press OFF to
extinguish the
main burner.
Press ON to
ignite the main
burner.
THE WS-4 SWITCH OPERATES THE
FLAME-HEIGHT CONTROL KNOB
Press HI/ON to turn unit on
or increase fl ame height.
=
=
Flame-height control
knob will rotate
counterclockwise.
Press LOW/OFF to
decrease fl ame height
or turn unit off.
Flame-height control
knob will rotate
clockwise.