Owner`s manual

29
To adjust the fl ame pattern, take a long-blade screwdriver or similar tool and stir the granules until the desired
pattern is achieved. DO NOT REMOVE GRANULES FROM THE BURNER PAN.
FLAME PATTERN ADJUSTMENT (ALL MODELS)
Insert blade into sand and stir granules in
various places until desired fl ame pattern is
achieved.
Long-bladed screwdriver
(or similar)
MAINTENANCE
Periodically remove the logs and examine the burner assembly. If dirty, clean with a stiff brush. Also
examine the area around the pilot. Any dirt or lint in this area should be removed. This will ensure
long life and trouble-free operation. An annual inspection and cleaning of the vent system (chimney
and damper) by a qualifi ed agency is recommended. For safe operation and proper performance,
use only Peterson Real-Fyre
® parts and accessories.
Periodically observe the fl ames. Flames should be approximately 22"-24" above the fi replace fl oor, a little blue at
the base mostly orange and yellow fl ames (see Fig. 19-1). The fl ames should impinge on the logs and grating as
little as possible to avoid sooting the logs or the grating.