Owner`s manual

INSTALLATION (cont.)

8. Be sure gas to the ﬁ replace is off. Attach the large

adapter (Item 3A) to the gas-supply stub using a pipe

compound resistant to all gases. Tighten securely.

Then attach the open end of the ﬂ ex connector to

the large adapter. Tighten securely. Ensure the pan

rests level on the ﬁ replace ﬂ oor after connection.

Adjust the pan if necessary.

9. LEAK TEST: Use a long-necked butane lighter, or

lay a lighted match next to the burner pipe, and

carefully turn on the gas supply until the burner

ignites. Test at all connections for leaks using the

appropriate soapy water solution. If bubbles appear,

a leak is present. Turn off the gas and tighten at all

connections. Repeat until no leaks are present. If

a leak persists, turn off the gas supply and contact

the local gas company or dealer. NEVER USE A

FLAME TO CHECK FOR LEAKS.

Turn off the gas supply prior to proceeding.

Fig. 7-1 - Fireplace valve

Fuel injector

Flex

connector

Larger

adapter

Burner

Pan

Gas

supply line

Small

adapter