Owner`s manual

2
L-A2-232
REV 3 - 1101141356
TABLE OF CONTENTS
TABLE OF CONTENTS
Tools Recommended
The following tools and supplies may be needed to
assemble, install, and test the Real-Fyre
®
gas burner system:
1. Adjustable open-ended wrench 8" - 10"
2. Pipe wrench 8" - 10"
3. Pliers
4. Tefl on tape or pipe compound resistant to propane gas
5. Small Phillips-head screwdriver & fl at-head screwdriver
6. Leak detector or soapy water solution & brush to test
for gas leaks
7. Work gloves
Other tools used for plumbing or gas appliance installation
may be necessary.
WARNING
Improper installation, adjustment, alteration, service,
or maintenance can cause injury or property damage.
Refer to this manual. For assistance or additional
information, consult a qualified installer, service
agency, or the gas supplier.
FOR YOUR SAFETY
Do not store or use gasoline or other fl ammable
vapors and liquids in the vicinity of this or any other
appliance.
PARTS LIST 3
IMPORTANT INFORMATION 4
FIREPLACE REQUIREMENTS 4
GLASS/GEMS QUANTITY DETERMINATION 5
INSTALLATION 6
GLASS/GEMS PLACEMENT 8
OPERATING INSTRUCTIONS 9
CLEANING AND MAINTENANCE 10
MAINTENANCE 10
CLEANING 10
SER
VICE 10
FLAME DESCRIPTION 10
PILOT BURNER ADJUSTMENT (IF EQUIPPED) 11
OPTIONAL CONTROLS FOR YOUR REAL-FYRE
®
BURNER SYSTEM 12
OPTIONAL PETERSON VALVES & SAFETY PILOT KITS 13
TROUBLESHOOTING 14
WARRANTY 16