Owner`s manual

7
REV 0 - 1012011423
L-A2-298
LOG PLACEMENT
Fig. 7-1
CAUTION: Burn hazard. Logs will remain hot for some time after use. You must maintain the
log layout as shown to ensure proper operation of your log set. If you need to
reposition any log to maintain the proper layout, use heat-resistant gloves or allow
logs adequate time to cool before handling.
1. Log placement is very important for the proper
operation and performance of the Real-Fyre
®
gas
log set. Although you have some fl exibility in the log
arrangement, it is necessary to follow the log placement
instructions carefully to fully enjoy the log set.
2. Place the bottom logs on the grate. The log locators
ensure that adequate space between the logs is
maintained for a clean burn (Fig. 7-1).
3. Place the middle/top logs diagonally with space betw
een
the logs so that the fl ames are not choked off. Adjust
the middle/top logs until desired look, and fl ame pattern
are achieved. Flexibility is possible provided excessive
sooting does not result from fl ames striking the logs too
directly. Reference Fig. 7-2 for some examples.
Styles and sizes will vary depending upon the log set
ordered. If the log set ordered includes placement
instructions; follow those instructions.
Fig. 7-2