Owner`s manual

2
L-A2-265
REV 1 - 1009220843
GENERAL INFORMATION 2
PARTS LIST 3
IMPORTANT PRE-INSTALLATION AND FIREPLACE SAFETY INFORMATION 4
GLASS/GEMS QUANTITY DETERMINATION 5
INSTALLATION 6
INSTALLING THE BURNER 6
GLASS/GEMS PLACEMENT 8
BURNER PREPARATION 8
OPERATING INSTRUCTIONS 9
CLEANING AND MAINTENANCE 10
MAINTENANCE 10
CLEANING 10
SERVICE 10
FLAME DESCRIPTION 10
PILOT BURNER ADJUSTMENT (IF EQUIPPED) 11
TROUBLESHOOTING 12
WARRANTY 14
GENERAL INFORMATION
TABLE OF CONTENTS
Keep the area of the gas burner system clear and free from combustible materials, gasoline, and other fl ammable
vapors and liquids.
* This required width allows for centering of the system.
Add 4" to front width if the burner is to be installed with
a pilot kit.
Note: Bracketed sizes indicate non-certified burner
systems.
* For Masonry-Built Fireplaces; add 4 sq. in. to amount shown.
Burner
size
Min. Fireplace Dimensions
BTU
Width* Depth Height
NAT. L.P.
16/19" 25" 12" 18" 45k 35k
18" 26" 12" 18" 65k 60k
24" 30" 12" 18" 75k 65k
30" 36" 12" 18" 80k 70k
[36"] 42" 12" 18" 120k 110k
[42"] 48" 12" 18" 130k 120k
[48"] 54" 12" 18" 150k 130k
[60"] 66" 12" 18" 170k 140k
Minimum Free Opening Area of Chimney Damper for Venting (sq. in.)
For Factory-Built Fireplaces *
Chimney
Height
16/19" 18" 24" 30" 36" 42" 48" 60"
15' (min.) 28 41 47 50 75 82 94 107
20' 26 37 42 45 68 73 85 96
30' 23 33 38 40 61 66 76 86