Owner`s manual

11
OPTIONAL CONTROLS FOR YOUR REAL-FYRE
®
BURNER SYSTEM
This unit may come without a valve installed.
It may be connected directly to and operated by your fi replace valve.
Alternatively, your Real-Fyre
®
glass burner may be operated using a number of optional Peterson control
systems (listed below). Peterson control systems are engineered to provide convenient, safe, and reliable
operation of your gas burner system.
For safe operation, proper performance, and to comply with safety standards and certifi cations, use
only Robert H. Peterson Company control systems, parts, and accessories with your Real-Fyre
®
burner
system.
If you have purchased a valve separately, follow the installation instructions that come with your control
system.
Peterson Control System and Combinations
Primary Control Method Order #
Manual On/Off Systems
Manual on/off knob
(match lit, no pilot)
AV-17
Manual on/off rod handle
(match lit, no pilot)
AV-18
Manual Safety Pilot Systems*
Safety pilot w/knob SPK-20
Safety pilot w/rod handle SPK-21
Low-profi le valve SPK-26
Piezo spark pilot ignition SPK-32
Piezo intermittent ignition pilot SPK-33
Remote Safety Pilot Systems*
Toggle switch N/A
And
also requires
one of:
APK-11(M)(P)
or
APK-10(M)(P)
or
EPK-01
Wall switch WS-1
Wall timer WS-2
Wood chip switch WCS-1
RUS remote RUS-1
Remote RR-1
Deluxe remote RR-2
Pine cone remote receiver PC-105
RVF remote RVF-1
APK-15(P)
or
APK-17(P)
Wall switch (variable w/switch) WS-3
Variable fl ame-height remote VR-1A
Deluxe variable fl ame-height remote VR-2A
*When systems are to be used with propane gas, add a "P" to the control model no. (e.g., APK11MP). Propane glass sets require a safety pilot system.
Not all safety pilot systems are available for all glass set sizes.
**"M" stands for remote-capable systems. (Remote not included.)