Owner`s manual

9
Fig. 9-3
Woodland
Oak
Split Oak
Designer
Plus
Royal
English Oak
Designer
Be sure to provide a minimum of 3" between the
front and rear log (Fig. 9-2). This will create the energy
effi ciency and heat radiating effect of the log set and
will also reduce carbon buildup.
4. Top logs should be placed diagonally with space
between the logs so that the flames are not
choked off. Top logs may be moved to achieve
the desired fl ame pattern. Some carbon buildup
(sooting) may be observed where the fl ames
impinge on the logs. Unless the sooting is
excessive, this should not be a concern. If sooting
is excessive, rearrange the top logs so there is
less fl ame impingement. Examples of log stacks
are shown in Fig. 9-3.
The beauty and design of the Real-Fyre
®
gas logs
are the result of skilled craftsmanship, research, and
engineering. The fi ne quality materials used to mold
the logs are formulated from kiln-fi red ceramics,
superior refractories and the best expanded shales
and aggregates, exactly proportioned. Added to this
material are steel reinforcing rods, precisely sized and
designed to prevent breakage. This creates realistic,
long-lasting logs. Their durability has been proven by
over a half century of use in family homes. Real-Fyre
®
logs are guaranteed for as long as you own them.
Hairline cracks are common and may appear after the
fi rst use. This will not affect the integrity of the logs or
the operation.
Each log is skillfully designed and crafted to duplicate
natural wood. Deep, rugged bark textures and hand-
painted highlighting challenges the viewer to tell
whether they are looking at real wood logs or Real-
Fyre
®
logs. Knotholes, branch stubs, and peeled-away
bark in many styles also add to the realism of the
Real-Fyre
®
gas log set.
DESIGNER AND CLASSIC SERIES LOG
PLACEMENT
(For Charred series log sets see page 10).
1. Log placement is very important for the proper
operation and performance of the Real-Fyre
®
gas log set. Although you have some fl exibility in
the log arrangement, it is necessary to follow the
log placement instructions carefully to fully enjoy
the log set.
2. The longest log is placed on the front of the grate
with the bark of the log facing forward. If you have
a heat chamber built into the log style, it should
be facing the rear of the fi replace (Fig. 9-1).
3. The second longest log (Item 2) is placed on the
rear of the grate with the bark of the log facing
forward. If you have a heat chamber built into the
log style, it can face forward or to the rear of the
fi replace as you desire.
Front
log
Rear
log
Back wall of
fi replace
3"
Grate
Front
log
Back wall of
fi replace
Stabilizer
clips
Burner pan
Fig. 9-1
Fig. 9-2
LOG PLACEMENT
REV 2 - 100429952
L-A2-271