Owner`s manual

IMPORTANT

For all valves, the air MUST be purged from the gas line before the pilot will light and burn properly. The

time needed to purge will depend on the length of the gas line to the unit and the amount of time since

the unit or gas line was last used. It may take several minutes before all the air is purged and the pilot

will light and burn properly. Reference the LIGHTING INSTRUCTIONS section in this manual.

Fig. 9-1 Control valve operating positions

OFF PILOT ON

Read settings here

REMOTE SYSTEM (if equipped)

If the unit is equipped with a remote; read and follow the

separate instructions (packed with the remote) for complete

remote installation.

CONTROL SETTINGS

We recommend that before you install the decorative media,

you familiarize yourself with the control valve layout. This will

help you to be conﬁ dent operating the burner system when

fully installed. See Fig. 9-1 for typical control positions.

BURNER INSTALLATION (cont.)