Owner`s manual

CLEANING AND SERVICING SAFETY INFORMATION

Fig. 11-1

ODS pilot (on side)

Burner ports

Gas valve

(behind front cover)

ODS pilot

opening

Air intake

openings

(on each side)

Fig. 11-2

Note: Regular cleaning and servicing will be necessary to ensure proper ODS pilot operation and proper burn

characteristics.

1. Always shut off the gas to the burner system while performing service work.

2. Allow the burner system to cool before servicing.

3. Installation, service, and repair must be done by an NFI Certiﬁ ed or other qualiﬁ ed professional

service technician. The appliance MUST be inspected before use, and cleaned at least annually to

prevent burner shutdown, sooting, odors, etc. by a qualiﬁ ed professional service technician. It must

be checked for clean burning operation and proper ODS pilot appearance, with the correct tools to

service this unit. More frequent cleaning may be required. Excessive lint can build up on this unit from

carpeting, bedding material, pet hairs, or other particles in the air. It is imperative that all control components

and compartments, burner(s), and circulating air passageways of the appliance be kept clean and free of

all obstructions. The ODS pilot is especially sensitive to a dirty environment and will not function properly if

dirty. Make certain all air openings are clean and free of obstructions, including:

a. The air intake openings on the ODS pilot assembly.

b. The ODS pilot opening.

c. The air shutter on the burner.

WARNING: Failure to keep the primary air openings of the burner clean may result in sooting and property

damage.

d. All of the ports on the burner. (See the CLEANING AND SERVICING section.)

4. Any safety screen or guard removed for servicing must be replaced prior to operating this burner

system.