Owner`s manual

SECONDARY (REAR) BURNER

The secondary (rear) burner can be turned on or off. Press the

Mode key to index to the Secondary Burner icon. See Fig. 47-1.

Pressing the Up/Down key will turn the secondary burner on/off.

The ﬂ ame level will not change when you turn the secondary

burner on or off. (The ﬂ ame level can only be changed in the

Flame Height mode.)

Note: This function is not applicable for D1-25 models as they

only have one burner. Although the remote will still display

the

function, it will have no effect on D1-25 operation.

TEMPERATURE INDICATOR (˚F or ˚C)

The temperature can be displayed in ˚F or ˚C. With the appliance

and remote transmitter off, simultaneously press the Mode key

and Thermostat key. The LCD display will alternate between °F

and °C. See Fig. 47-2.

KEY LOCK

To prevent unsafe operation of the appliance, a Key Lock function

is provided with this remote control system. To activate the key

lock function, ﬁ rst press (and hold) the Up key, then (while still

holding) press the Mode key. A lock icon will appear on the screen

(see Fig. 47-3). To deactivate, repeat this process.

During key lock mode, none of the keys will function. You must

deactivate the system before you can use the remote transmitter.

OPERATING DURING A POWER OUTAGE

If the AC power is interrupted during a power outage, this system

utilizes the batteries (installed in the remote receiver) as back-up

batteries. During the power outage the appliance will function,

with the exception of the Fan and Accent Light features (which

are dependent on 110VAC power).

REMOTE OPERATING INSTRUCTIONS (cont.)

Fig. 47-1 Secondary burner detail

Burner OFF Burner ON

Fig. 47-2 Temperature indicator detail

Fahrenheit Celsius

Fig. 47-3 Key lock mode