Owner`s manual

32
25" LOG SET
You must position and maintain the log layout as shown here to ensure proper operation of the direct
vent insert. Incorrect log installation could cause fl ame impingement and improper combustion, resulting
in soot and/or excessive by-products of combustion.
Note: Each log is numbered (on the log bottom) to aid in placement. Burnt American Oak log set shown here.
Important: HANDLE LOGS WITH CARE AT ALL TIMES.
Place the rear log (log #1) as shown. The bottom
of the log has two holes that align with two pegs
found on the burner.
Place the right front log (log #2A) as shown. The
bottom of the log has two holes that align with
two pegs found on the burner.
Place the left front log (log #2B) as shown. The
bottom of the log has two holes that align with
two pegs found on the burner.
Place the middle top log (log #3) as shown. The
rear log has a notch to aid in positioning the top log.
Place the right top log (log #4) as shown. The rear
log has a notch to aid in positioning the top log.
Place the left top log (log #5) as shown. The middle
top log has a notch to aid in positioning the left
top log.
1
2A
3
4
5
Periodically check the positioning of the logs to ensure proper log placement.
INSTALLATION (cont.)
2B