Owner`s manual

24
SERVICING AND CLEANING
Each installation site for any unit presents its own unique combustion environment. Specifi c factors such as weather,
wind currents, yard debris, altitude, drafts, the size of the surrounding area, all have an infl uence on the proper
operation of the gas appliance. A normally operating appliance will demonstrate the following characteristics:
A lively, realistic yellow fl ame
• Odor-free
If the fl ame is not clean (identifi able by excessive sooting on the decorative media), refer to the information below.
Some soot on the media may occur and should not be a concern unless excessive.
Cover your fi replace opening with a screen/protector plate whenever it is not in use, and follow the guidelines
below at least annually.
ANNUAL CLEAN / INSPECTION GUIDELINES
The fi replace, gas appliance, and installation must be inspected annually. Refer to these instructions and the
appliance owner's manual for details. Performing these procedures will ensure proper operation, appearance,
and safety. WEAR GLOVES.
If maintenance is required, it must be done by a qualifi ed professional service technician.
Always shut off the gas to the appliance while performing service work.
Allow the appliance to cool before servicing.
The entire appliance should be inspected regularly:
Excessive debris can build up on the fi replace or appliance from leaves, dirt, or other debris. It is critical
that all control components, burners, vent openings, and the surrounding area be kept clean and free of all
obstructions.
Examine that all components are properly assembled / installed as instructed in this manual and the appliance
owner's manual.
Ensure that all decorative media is properly placed as instructed in the appliance owner's manual.
The appliance must be replaced prior to being put into operation if it is evident that the appliance is damaged.
Contact your local dealer for replacement parts.
DO NOT use substitute materials when replacing any components of the fi replace or appliance.
Keep the vent openings and surrounding area of the of the fi replace clean and free of obstructions
at all times.
Periodically perform visual checks of the burner fl ames. The burner fl ames should be blue at the base with
a combination of blue/yellow at the body and tips. Contact a qualifi ed professional service technician for
maintenance.
To maintain the concrete components, see the CONCRETE CARE section for details.
Any guard or other protective device removed for servicing the appliance shall be replaced prior to operating
the appliance.
Verify proper operation after servicing.
CAUTION: HOT DURING OPERATION AND AFTER USE. Children must be supervised when in the
vicinity of this fi replace. Serious injury may occur! Children must be alerted to the hazard
of high surface temperatures and should stay away to avoid burns or clothing ignition.