Owner`s manual

11
SPECIFICATIONS AND DIMENSIONS (cont.)
This fi replace is designed to be installed with an R.H.P. vented/unvented gas appliance. Below is a list of
the options available for each fi replace type. The gas appliance is purchased separately. Contact your local
American Fyre Designs dealer when ordering.
Fireplace Styles Vented Burner Options Unvented Burner Options
(Cordova (022),
Reduced Cordova (023),
Grand Cordova (882)
G45 STAINLESS STEEL
(Log Set or Glass Models)
Match-Lit Models: up to 30" burners
Valve Models: up to 24" burners
G22 STAINLESS STEEL
Match-Lit Models: up to 30" burners
Valve Models: up to 24" burners
-
Cordova (122),
Reduced Cordova (123),
Grand Cordova (182)
-
G10 STAINLESS STEEL
up to 24/30" burners with 30" log set
G21 STAINLESS STEEL
up to 30" burners
Table 3 - Fireplace Burner Options
The unit's marking label plate is located in the interior of the
fi rebox. It hangs from a chain on the front inner wall (valve side).
Ensure the plate is placed away into the upper section of the unit
during installation. To view, simply reach in, access, then return
once done.
For unvented models, the top liner must be moved to one side.