Owner`s manual

INSTALLATION (cont.)

Fig. 16-1

Zone divider

Groove

Front

INSTALL THE FLAVOR GRIDS

Place the ﬂ avor grids directly onto the studs on the

burners. The panels allow heat from the burners to

be evenly distributed throughout the cooking area.

The panels are stainless steel and will heat and cool

quickly, making your barbecue very responsive to

the changes you specify in grill temperature. They

are rust resistant and may be cleaned with standard

oven cleaners. Some discoloring will be seen with

use. This is normal for stainless steel and does not

affect the function.

Fig. 16-2 Install ﬂ avor grids

Place onto studs

Fig. 16-1 Install zone dividers

REV 2 - 1412091405

L-C2-401

INSTALL ZONE DIVIDERS

Place the zone dividers as shown (Fig. 16-1) into

the grooves in the inner ﬁ rewall of the grill to allow

for maximum heat control in each zone. Remove

and store during rotisserie use.