Owner`s manual

25
SERVICING AND CLEANING
Each installation site for any unit presents its own unique combustion environment. Specifi c factors such as weather, wind
currents, yard debris, altitude, drafts, the size of the surrounding area, all have an infl uence on the proper operation of
the gas appliance. A normally operating appliance will demonstrate the following characteristics:
• A lively, realistic yellow fl ame
• Odor-free
If the fl ame is not clean (identifi able by excessive sooting on the decorative media), refer to the information below. Some
soot on the media may occur and should not be a concern unless excessive.
• Cover your fi replace opening with a screen/protector plate whenever it is not in use, and follow the guidelines below
at least annually.
ANNUAL CLEAN / INSPECTION GUIDELINES
The fi replace, gas appliance, and installation must be inspected annually. Refer to these instructions and the appliance
owner's manual for details. Performing these procedures will ensure proper operation, appearance, and safety. WEAR
GLOVES.
If maintenance is required, it must be done by a qualifi ed professional service technician.
• Always shut off the gas to the appliance while performing service work.
• Allow the appliance to cool before servicing.
• The entire appliance should be inspected regularly:
Excessive debris can build up on the fi replace or appliance from leaves, dirt, or other debris. It is critical that all
control components, burners, vent openings, and the surrounding area be kept clean and free of all obstructions.
Examine that all components are properly assembled / installed as instructed in this manual and the appliance
owner's manual.
Ensure that all decorative media is properly placed as instructed in the appliance owner's manual.
• The appliance must be replaced prior to being put into operation if it is evident that the appliance is damaged.
Contact your local dealer for replacement parts.
• DO NOT use substitute materials when replacing any components of the fi replace or appliance.
• Keep the vent openings and surrounding area of the of the fi replace clean and free of obstructions at all times.
• Periodically perform visual checks of the burner fl ames. The burner fl ames should be blue at the base with a
combination of blue/yellow at the body and tips. Contact a qualifi ed professional service technician for maintenance.
• To maintain the concrete components, fi rst wash them with a mild soap and water solution. A vinyl brush is
recommended. Allow to dry and follow up with a concrete sealer in order to preserve the fi nish.
• Any guard or other protective device removed for servicing the appliance shall be replaced prior to operating the
appliance.
• Verify proper operation after servicing.
CAUTION: HOT DURING OPERATION AND AFTER USE. Children must be supervised when in the vicinity of
this fi replace. Serious injury may occur! Children must be alerted to the hazard of high
surface temperatures and should stay away to avoid burns or clothing ignition.
TROUBLESHOOTING
If you have trouble with your gas appliance, please refer to the owner's manual provided with it. By trying one
or more of the solutions to the probable cause, you should be able to solve the problem. If the manual does
not address your present problem, or if you have other technical diffi culties with your appliance, please contact
your local dealer or visit our web site at www.rhpeterson.com.