Owner`s manual

16
FIREPLACE INSTALLATION (cont.)
FIREPLACE ASSEMBLY - OVERVIEW
CAUTION: Fireplace components are heavy. CAREFULLY handle all components during assembly.
• Fig. 16-1 provides an overall orientation and bolt assembly detail for the fi replace.
(Phoenix w/ 16" Radiused Bullnose Hearth shown. Phoenix w/ Back Venting, Mariposa, and Grand models
assemble in a similar manner. Assembly may slightly vary depending on model and hearth selected.)
• The Phoenix w/ Back Venting model has a mantel in place of the chimney.
• Grand models have the addition of side walls, which are addressed in the following step-by-step section.
• This section is just an overview, refer to the following step-by-step section for complete assembly
and installation details.
Fig. 16-1
Overall Orientation
Phoenix Fireplace w/
16" Radiused Bullnose
Hearth shown
ASSEMBLY / INSTALL OVERVIEW
1. Place / Assemble hearth *
2. Attach body
3. Connect gas (not shown)
4. Attach side walls
(Grand models only, not shown)
5. Install fi rebox liners
6. Place chimney / mantel
7. Install burner (not shown)
2
5
6
1*
* One-piece hearth shown here.
Multi-piece hearths require assembly.